PRODUCT TYPES
Lowara offers a wide range of end suction centrifugal pumps in stainless steel and cast iron. They are of robust design and highly efficient, with performance adapted for variable speed control. The Lowara end suction centrifugal pumps are the perfect fit in any water supply application within residential and commercial building services, public utilities, industry and aquaculture, irrigation, chillers, and more.
Pumps for clean water / clear liquid
- CEA
- e-NSC
- e-SH
- Vogel series LS, LSC
- Vogel series LSB
- Vogel series LSN
Solids-handling pumps
- CO
- SHO
CEA Stainless steel threaded centrifugal pumps
Wide range of stainless steel pumps for domestic and industrial applications.
Available on request: “V” version with FPM seals for temperatures up to 110°C and “N” version completely made of AISI 316 stainless steel.
SPECIFICATIONS
- Delivery: up to 31 m³/h
- Head: up to 30 m
- Power supply: both single and three-phase 50 and 60 Hz
- Power: from 0.37 kW up to 3 kW
- Maximum operating pressure: 8 bar
- Temperature of pumped liquid: from -10 °C to 110 °C
Wide range of stainless steel pumps for domestic and industrial applications.
Available on request: “V” version with FPM seals for temperatures up to 110°C and “N” version completely made of AISI 316 stainless steel.
SPECIFICATIONS
- Delivery: up to 31 m³/h
- Head: up to 30 m
- Power supply: both single and three-phase 50 and 60 Hz
- Power: from 0.37 kW up to 3 kW
- Maximum operating pressure: 8 bar
- Temperature of pumped liquid: from -10 °C to 110 °C
CO Threaded centrifugal pumps with open impeller
Wide range of stainless steel pumps for domestic and industrial applications.
Available on request: “V” version with FPM seals for temperatures up to 110°C and “N” version completely made of AISI 316 stainless steel.
SPECIFICATIONS
- Delivery: up to 31 m³/h
- Head: up to 30 m
- Power supply: both single and three-phase 50 and 60 Hz
- Power: from 0.37 kW up to 3 kW
- Maximum operating pressure: 8 bar
- Temperature of pumped liquid: from -10 °C to 110 °C
Wide range of stainless steel pumps for domestic and industrial applications.
Available on request: “V” version with FPM seals for temperatures up to 110°C and “N” version completely made of AISI 316 stainless steel.
SPECIFICATIONS
- Delivery: up to 31 m³/h
- Head: up to 30 m
- Power supply: both single and three-phase 50 and 60 Hz
- Power: from 0.37 kW up to 3 kW
- Maximum operating pressure: 8 bar
- Temperature of pumped liquid: from -10 °C to 110 °C
e-NSC Cast iron end suction pumps
Taking end suction pumps to a new level
The Lowara e-NSC end suction pumps combine high efficiency with high flexibility regarding installation, material options and temperature. This make the e-NSC the natural choice for water transport, hydronic heating and chiller systems, fire protection systems and a vast number of industrial applications.
HIGH EFFICIENCY
New designed high efficiency hydraulics well exceeding the ErP2015 level and IE3 motors set the basis for very low operation costs. To optimize the operation costs further, the e-NSC can be equipped with a Hydrovar variable speed pump controller (up to 45 kW). In installations with a big variance in the demand, it can save up to 70% of the energy cost compared to a fixed speed pump.
LONG SERVICE LIFE & EASY MAINTENANCE
Robust design, different bearing frame sizes and stainless steel replaceable wear rings ensure a long service life. The e-NSC is also designed for easy maintenance and all service points are easy reachable to reduce downtime.
EXACTLY THE RIGHT CONFIGURATION
The e-NSC end suction pumps come in three different configurations:
- Frame mounted (bare shaft or complete with coupling and motor)
- Stub shaft
- Close coupled for compact footprint
Material options that range from cast iron to duplex stainless steel, multiple mechanical face seal options and the availability of an advanced bearing bracket make the e-NSC the right solution for all water-based fluids.
SPECIFICATIONS
- Delivery: up to 1800 m³/h
- Head: up to 160 m
- Power supply: three-phase 50 and 60 Hz
- Power: from 0,25 kW up to 355 kW
- Maximum operating pressure: 16 bar
- Temperature of pumped liquid: from -25°C to +140°C
e-SH Stainless steel 316 end suction pumps
The Lowara e-SH series is a single impeller centrifugal pump made in AISI 316 stainless steel making it the right pump for moving water and aggressive liquids in a vast number of applications where high chemical resistance is needed.
HIGH EFFICIENCY AND LOW OPERATION COSTS
Newly designed high efficiency hydraulics with MEI values well above the ErP2015 level and IE3 motors set the basis for very low operation costs. Equipped with a Hydrovar variable speed pump controller, the duty is always exactly where it should be. And it pays off: reducing the speed by 50% reduces the power consumption by 85%.
EXACTLY THE RIGHT CONFIGURATION
Pump and impellers made in AISI 316 stainless steel with choice of mechanical seals/ motor options makes the e-SH is the right solution for 1000’s of liquids.
The e-SH is WRAS approved for potable water use.
SPECIFICATIONS
- Delivery: up to 240 m³/h
- Head: up to 110 m
- Power supply: three-phase 50 and 60 Hz
- Power: from 0,25 kW up to 75 kW
- Temperature of pumped liquid: from -10°C to +120°C
- Extended temperature versions from -30°C to +120°C
Vogel series LS, LC
Volute casing pumps acc. to ISO 5199
Single Stage Pumps – LS, LC
Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame.
Process design, back pull out for easy maintenance. Disassembly of impeller and bearing frame without dismantling of the pump casing and motor possible (spacer type coupling required). Suction branch axial, discharge radial upwards (optional horizontal possible). Drive by electric motor and flexible coupling arranged on common base plate.
SPECIFICATIONS
- Delivery: up to 4,600 m³/h
- Head: up to 100 m
- Power supply: three-phase 50 and 60 Hz
- Maximum operating pressure: 25 bar
- Temperature of pumped liquid: from -10 °C to 180 °C
Vogel series LSB
Blockpump
Single Stage Pumps – LSB
Single stage end suction pump in close coupled (block) design, based on the hydraulics acc. to ISO 2858, with direct mounted IEC motor, design B5.
SPECIFICATIONS
- Delivery: up to 450 m³/h
- Head: up to 150 m
- Power supply: three-phase 50 and 60 Hz
- Maximum operating pressure: 16 bar
- Temperature of pumped liquid: from -40 °C to 140 °C
Vogel series LSN
Volute casing pump acc. ISO 2858 and ISO 5199
Single Stage Pumps – LSN
Horizontal single stage volute casing pump, designed acc. to the international standards ISO 2858 /EN 22858 and ISO 5199/EN 25199
SPECIFICATIONS
- Delivery: up to 450 m³/h
- Head: up to 150 m
- Power supply: three-phase 50 and 60 Hz
- Maximum operating pressure: 16 bar
- Temperature of pumped liquid: from -40°C to 180°C